​ ​ ​ ​ ​ ​

A SOLYX® product.

Natural Series film is made from cultivated mulberry fibers (kozo) which are harvested from living mulberry trees - without harming the tree. The outer layer of bark is taken off the tree and the fibers taken from the “back” side of the bark. 
This film features shredded bamboo inclusions, adding dimension and texture to the film. The base fiber is kozo and it is light, crisp and semi-translucent.

This film features SOLYX “DryApply” technology. Simply remove the protective backing and squeegee directly onto the glass surface dry. Do not use any solutions to install this product.

Priced per ft. Order the quantity (length) needed x 44" wide.

Image of our privacy levels

Privacy Level 1 - Least Private
Most Visibility, offers the least privacy

Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy

Privacy Level 3 - More Private
Little Visibility, offers partial privacy

Privacy Level 4 - Most Private
Least Visibility, offers most privacy

Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.

Privacy Guide

Image of our privacy levels

Privacy Level 1 - Least Private
Most Visibility, offers the least privacy

Privacy Level 2 - Semi-Private
Partial Visibility, offers semi privacy

Privacy Level 3 - More Private
Little Visibility, offers partial privacy

Privacy Level 4 - Most Private
Least Visibility, offers most privacy

Note: These privacy levels are intended as a general guide, and are based on an object being 18 inches behind the film. Viewing conditions will vary. Please request samples to determine if the film and privacy level are suitable for your application.


SOLYX® Decorative Window Film Installation Guide for DRY APPLY FILMS

DRY APPLY – NO WATER

1. Clean the areas to which the film is to be applied, removing all traces of dirt, dust, silicone, grime, grease, etc.

2. Remove the liner and apply the film dry, keeping the bottom of the film off the glass. Squeegee from the top working down with the squeegee supplied.

3. The Film can be cut slightly larger than the glass area to be covered. ½” overlap on either side and ½” along the bottom. This can be trimmed off at the end using the glass frame (window edge) as a guide, using the knife blade provided.