SOLYX ® Decorative Privacy Window Films are self adhesive films that come in different patterns and shades and are easily replaced to update the appearance at a later time. Now any flat glass surface can be turned into a work of art, be it an office, restaurant, den, bathroom or child's room. Frosted films diffuse light without appreciably cutting down the ambient light. As a result, any existing window can be converted to privacy glass in a multitude of attractive patterns.
SOLYX ® Decorative Films are ideally suited for applications that require day or night privacy without sacrificing natural light levels in both commercial and residential applications. See Applications page. Commercial applications are found in banks, restaurants, health clubs, hotel foyers, conference rooms and office partitioning. Commercial buildings are dramatically increasing the use of internal glass walls as partitioning. This brings natural light into offices creating greater work productivity, as well as the illusion of more space while offering privacy. Residential applications include solariums, bathrooms, entry doors and sidelights, etc.
Both Static Cling and Adhesive films are identical in installation!
SOLYX ® static cling window film has a great many advantages. One of the main benefits of SOLYX ® static cling film is that it can be used many more than a few times over, since it does not involve adhesives. It can be removed and installed with ease, doesn't leave behind glue residue, and can be placed on plastic, Plexiglas, and ordinary glass.
SOLYX ® self-adhesive window film offers a more permanent application, ideal for high traffic areas where a more durable, longer lasting product is required. SOLYX ® self-adhesive films that come in different patterns and shades are easily replaced to update the appearance at a later time.
Yes, all SOLYX ® static cling films are fully removable and reusable.
SOLYX ® adhesive backed films are fully removable, but cannot be reused after they have been removed.
The design determines if the film is made of Polyester or Vinyl.
Polyester: Dimensionally stable, does not stretch, provides optical clarity, and allows for wider roll widths, a "green" product.
Vinyl: Allows for heavily textured designs, more receptive to surface textures and more suitable for Plexiglas, Polycarbonate and Acrylic applications. Less optical clarity than Polyester.
Decorative Films are ideally suited for applications that require day or night privacy without sacrificing natural light levels in both commercial and residential applications. Commercial applications are found in banks, restaurants, health clubs, hotel foyers, conference rooms and office partitioning. Commercial buildings are dramatically increasing the use of internal glass walls as partitioning. This brings natural light into offices creating greater work productivity, as well as the illusion of more space while offering privacy. Residential applications include solariums, bathrooms, entry doors, sidelights, etc.
In an attempt to offer the very best service to each and every customer, we ask that any questions not already answered on our website be emailed to the appropriate department shown on the Contact Us section of our website.
We accept Visa, Master Card, Discover, American Express and PayPal.
No. Pre-cutting film to exact specifications is not a service we currently offer. Each film purchased is supplied in one continuous piece.
No. Each film ordered is supplied as one continuous roll.
Yes, free samples are available from the product details for each film. You may order up to 5 different free samples per project.
Free UPS Ground shipping to locations within the United States is available for any orders sub-totaling at $89.00 or more. Free shipping to international locations is not currently available.
Installing SOLYX ® window film is one of the easiest do-it-yourself projects there is. All SOLYX ® Decorative Films have an acrylic adhesive system protected by a removable release liner which must be removed prior to installation. Films are installed using a water and soap based solution. See the Installation Instructions page for more details on installation.
Yes. Unlike other decorative glass processes, SOLYX ® Decorative Films can be removed if desired. This of course is a huge advantage and most landlords do not object to their tenants' installation of film when they find out the product can be removed. In addition, the cost of reinstalling SOLYX ® Decorative Films on existing glass is low in comparison to other processes.
Removing SOLYX ® Static Cling films is as easy as peeling the film from the glass and cleaning.
In most cases it is very easy to remove SOLYX ® or SimGlas adhesive films. Peel away the film from one corner and pull the film from the glass. If any adhesive remains on the glass it can easily be removed with a spray of soapy water and a single edge razorblade. (Blades cannot be used on Plexiglas or Polycarbonate sheets to remove film.)
Basically, you will need tools to clean the glass, cut the film, squeegee the film and spray the soap and water solution. As we now charge for tools, you will need to purchase either the basic tool kit or complete tool kit with your order. These tool kits may be found in our category page Tools & Cleaner.
Always on the inside if possible. The films will stick to the outside, but the life of the films will be reduced due to weathering if installed on the exterior side (exposed to the elements).
Static Cling non adhesive films are not recommended for outside installation.
Yes, both adhesive and static cling films can be installed in humid and moist conditions.
If being installed on a shower door, mounting on the outside of the shower door is recommended.
Yes, most of our films can be installed onto Plexiglas or Polycarbonate sheets. Unlike glass or mirror, Plexiglas expands and contracts by temperature and also emits gasses, this may cause many small air bubbles between glass surface and film as time goes on causing the film to appear wrinkled or blistered.
No, the surface must be totally flat and smooth, otherwise the film will fail to adhere correctly.
All of our films with the exception of SXWF-BO Blackout Film, are safe for installation onto double or triple pane windows, Wire Glass, tempered glass, Plate glass and gas filled windows.
Air bubbles are caused from improper squeegee technique or not applying enough wetting solution during install. If air is trapped from improper installation, simply peel the film back*, and reinstall following the recommended installation instructions (*Static Cling ONLY).
Water bubbles are pockets of water trapped under the film during in installation or that collects after the film is installed and begins to dry. In most cases this should disappear in 5-7 days from date of install.
Under reasonable weather conditions, film will dry flat, with no blisters, within 30 days, when viewed under normal viewing conditions. Normal viewing conditions are viewing treated windows from a distance of ten feet from the room side, looking at a clear or uniformly overcast sky. Since a particle-free applicatino isn't possible, there may be small amounts of dust or grit caught between the film and glass.
There may also be a small amount of water left behind the film, particularly with the thicker films. Please be patient. Although in most cases this occurs in 5-7 days, in rare cases this could take up to 60-90 days for the water to fully evaporate through the film.
To separate the liner from SOLYX ® films, take two pieces of scotch tape and stick them opposite each other at one corner...then pull these two pieces of tape apart and the liner will separate from the film. The adhesive surface will now be exposed. Wet this adhesive surface. Do not let the film fall upon itself as it will stick if not wet and it will be hard to separate!
There is a natural curl to film since it's been rolled up in a box for a period of time. To begin, unroll the film across a clean table and allow for the film to relax.
In the unlikely event that the film is curly up along an edge after installation, wrap your squeegee in a few layers of paper towel and push the film firmly down, beginning several inches away from the edge, moving toward the lifted edge. This will force the air out and enable the film's adhesive/mounting surface to bond to the glass. You may have to repeat this step several times.
If the problem continues, use a hair dryer on the warm (not hot) setting to help the remaining moisture evaporate along the edge and start to bond. Hold the hair dryer about 8-12 inches away from the affected area while stroking down the edge with the paper towel wrapped squeegee.
We recommend only SimGlas® Window Film Cleaner and microfiber cloth.
For more info and to purchase please visit our Tools & Cleaner page.
This depends on the location you are going to install (bathroom, living room, air conditioned room or not, etc.), and where are you living, but in general 5-9 years is no problem.
To some extent, yes. The film is primarily for decoration and privacy purposes. It is important to understand there are multiple causes for fading, UV rays, visible light, infrared rays, heat, and our films do reduce all of them to some extent depending on which film is selected.
Yes, please email us at email@example.com for any specification sheets needed.
SOLYX® films will be free from defects in material and manufacture for a period of five (5) years from the date of installation.
Yes, the decorative films will give you privacy day and night. We highly recommend ordering samples to make sure the film will provide sufficient privacy in your situation. With certain designs, if you have the light on inside at night and you walk by the window, people outside might be able to see your silhouette.
In a word, no. Nor is there any one-way mirror glass that allows this either. The Privacy Control Mirror film has been designed to provide daytime privacy. Wherever the greater source of light is, that is the side where the mirror or reflectivity will be. During the day, the greater source of light is generated from outside. Therefore when looking into your home from the outside you will see the mirror surface. When looking from the inside of the home to the outside, you will be able to see clearly.
During the night - Since the greater source of light will be the lighting in your home, when you look out your window, you will see the reflectivity or mirror image. Someone looking into your window from the outside will be able to see in if the lights are on indoors. Decorative Films, LLC offers a film with low interior reflectivity and higher outward reflectivity (SX-SG09 Silver/Grey One Way), so night time reflectance is reduced. There is no technology at this time to make a window film (or glass) truly "one way" under all lighting conditions.
The Light Diffusing Films provide 24-hour privacy and diffuses natural light.
It provides the same appearance as frosted or sand-blasted glass.
If you are not completely satisfied with our product, please email Lauren@decorativefilm.com with your Order Number and request a Return Material Authorization (RMA) number within 30 days of receipt of your order. We will then reply to you with an RMA number for the return. A refund for the price of the merchandise will be made if merchandise is returned to us in usable condition. No refunds will be made if merchandise has been cut or if the backing has been peeled from the film or if the merchandise is in less-than-perfect condition. Custom Made-To-Size orders are non-returnable and non-refundable. Shipping charges are non-refundable. When you return an item, please be sure it is in new condition, securely wrapped, and to include the original packing slip or copy of invoice.
Send insured and postage-paid to: Decorative Films, LLC., Attn: Retail Returns, 3909 Cornell Place, Frederick, MD 21703 USA.
Any orders returned that were originally shipped with free shipping will be charged a $15.00 return service fee.
To make changes to your order or to cancel your order, please contact us at Lauren@decorativefilm.com as soon as possible prior to your order being shipped. A full credit will be issued for your order providing it has not been shipped.
Most orders are processed and shipped within 2 business days from our warehouse in Maryland providing the film is in stock and available when the order is placed. If the film is not in stock you will be notified of the expected ship date.
Some Made to Size orders could take longer depending on ongoing projects. Please allow 5-7 business days lead time for Made to Size orders.
Cutoff time for any orders being shipped faster than UPS Ground (i.e. UPS Next Day, UPS 2nd Day, etc.) is 1:00pm EST.
Once your order ships, we ask that you please allow 1-6 business days to receive your order (unless otherwise specified.)
You will receive an email with contact information and a tracking number to track your shipment in real time.
For more shipping information please visit our Shipping Info page.
With so many films to choose from, you may have a tough time selecting the film design that’s just right for your project.
We’re happy to send up to five samples for you to keep to help you with this important decision. This way, you’ll be able to place the samples side by side, compare, and make the best choice for your specific needs before ordering. Just click on the product you have an interest in, scroll down on the page and click “Add Sample to Cart”. The free sample will be added to your shopping cart. Once you’re done, just checkout and we’ll mail them right to you! *Free sample orders include $2.95 for shipping & handling. Sample order processing may take 3-5 days.